Understand the loading and unloading process of bulk feed carriers
2021-04-25
Bulk feed trucks are the best means of transportation for large-scale grazing lands. They do not have to feed feed by hand. They are convenient, practical and save manpower time. At first, this type of vehicle was very popular in foreign countries. With the development of domestic proprietary vehicles, it has been widely used in China. Bulk feed carriers have provided a good platform for the breeding industry and have driven the economic development of the breeding industry. The main reason why it is recognized is that it can automatically load and unload. How does it complete the work of loading and unloading at work? China Automotive Network Editor shares with you how it works.
Bulk feed truck loading process:
After the bulk feed vehicle arrives at the storage tower of the farm, the feed truck is parked to a valid position, and after reliable positioning, the three-phase power supply is switched on or switched to the onboard generator power supply (the voltage is stabilized at 380 V and the frequency is 50 Hz). Toggle the power selection switch (self-generating or external), and then toggle the phase sequence switch. The green light is on the correct phase sequence. When the lifting auger is put on the material, the corresponding hopper should be opened according to actual needs. The initial control should be to put the control handle to the first gear, and after the flow material is smooth, it can be put into the second or third gear. The material discharge must be gradual and progressive. It is absolutely forbidden to open the gate handle to the fourth gear at the beginning of discharge, and the role of the fourth gear is to set the material in the bin. After the storage is empty, the operation handle is closed, and the materials in the other storage chamber are completed one by one according to the same method as described above. After the material is completely discharged, press the stop button of the horizontal auger first, and wait a few seconds before pressing the stop button of the vertical auger. When the auger no material is output, press the stop button of the auger. Loosen the hoop handle, turn the steering wheel to reset the lifting auger, tighten the hoop, and unplug the power outlet. This operation is completed.
Bulk feed transport unloading process:
The first step is to park the vehicle in an appropriate position, open the corresponding silo, and raise the activity to target the silo. Feed will be discharged through the horizontal dragon, vertical dragon, and active dragon to the discharge port, and the feed power will depend on Is the driving force of Nine Dragon Motors.
After reading the above introduction, I believe that the customers in need of buying bulk feed carriers have already solved their doubts in their hearts. Large-scale grazing lands rely on human feeding to waste time, reduce operating efficiency, and increase the efficiency of bulk feed carriers.
The cement silo (cement tank) has a cylindrical structure, and the bottom is supported by four round tube legs. The whole silo is in the form of steel structure and welded; the top is provided with a dust collector and a pressure safety valve.
Cement silo (cement tank) has the following parts: the silo body steel structure part, the ladder, guardrail, feeding tube, dust collector, pressure relief valve, high and low level meter, the discharge valve, etc
The horizontal feeder has large capacity, high volume utilization, convenient installation and adjustment, compact structure, light weight, easy operation and convenient transfer; small terrain restriction, easy for process layout.The main machine is mainly composed of double cone tank feeder, unloading port gas system and tank support.
Bulk Silo, Welded Cement Silo, Large Welded Fly Ash Cement Storage Silo, Small Capacity Fly Ash Cement Storage Silo
Century New Power International Trade Co., Ltd. http://www.sdjzcseriesdrumconcretemixer.com